Levelling Castor

WDS12250

Material: Wheels, Nylon with plain bore. Grey rubber tyre fitted to 12250-103 Housing Zinc Plated Notes:1. Low overall height. 2. The hosing is in the levelling position free of load and can be turned3. Good manoeuvrability thanks to the long distance between the wheels4. Head of the housing fitted with double ball race5. Levelling foot reinforced polyamide dia 40mm with NBR rubber pad6. Length of the wheel shaft: 100 mm (wheel dia 40) 110 mm (wheel dia 50)

From £40.77  

bolt Hole Levelling Castor - With Brake

WDS12251

Material: Wheels- Nylon (12251-02) with plain bore. Grey rubber tyre fitted to 12251-101. Housing and metal parts: Stainless Steel 1.4301 (A2) Notes: 1. The castor is fixed by stepping on the lever at the corresponding side 2. Low overall height 3. Good manoeuvrability thanks to the long distance between the wheels 4. Head of the housing fitted with doulbe ball race 5. Levelling foot reinforced polyamide 40mm with NBR rubber pad 6. The castor can be rotated throught 360 degrees in any position 7. Height adjusting range (foot operated) :max 12mm, by turning the castor around the mount 8. Ground clearance of the mount: 5mm can be increased up to 20mm by swivelling the mount 9. Sizes overall: length 140 mm, width 100 mm STAINLESS STEEL

From £208.01  

Plate Fitting Levelling Castor with Foot Operating Break

WDS12253

To be used where ever machines and equipment on wheels need to be brought to a stable standstill. The castor is fixed by stepping on a longer lever. By stepping on the shorter lever, the equipment becomes movable again. The force necessary to operate the levers is not affected by the weight of the load.

From £84.98